BFPVG - PEEL FILMITE

Product Identification

Product ID:PEEL FILMITE
MSDS Date:01/01/1985
FSC:8030
NIIN:00-786-9853
MSDS Number: BFPVG

Responsible Party
DUBOIS CHEMICALS, DIV. OF CHEMED CORP.

Emergency Phone: (513) 769-4200

Cage: DUBOI

Contractor
DUBOIS CHEMICALS DIV OF CHEMED CORP
SHARONVILLE, OH 45241 US

Telephone: 513-554-4200

Cage: DUBOI

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 38%.

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:HEADACHES, NAUSEA, GIDDINESS

First Aid

First Aid:REMOVE PATIENT FROM CONTAM ATMOSPHERE; ARTIF RESP IF NEEDED.
WIPE OFF SKIN; FLUSH EYES THOROUGHLY W/WATER FOR AT LEAST 15 MIN &
GET MEDICAL ATTN.

Fire Fighting

Flash Point:140-146F PMCC
Extinguishing Media:CO*2, FOAM, DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:CHLORINATED SOLVENT DECOMPOSITION
PRODUCTS ARE TOXIC.

Accidental Release

Spill Release Procedures:COLLECT W/FLOOR DRY MATERIAL OR ALLOW SOLVENTS
TO EVAPORATE & DISPOSE OF FILM FORMED.

Handling

Handling and Storage Precautions:AVOID FREEZING; STORE IN COOL PLACE;
OPEN BUNGS SLOWLY TO RELEASE ANY PRESSURE. VAPORS ARE HEAVIER THAN
AIR.
Other Precautions:VOLUNTARY; CAUTIONS ON CONTAINER LABEL.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD RESP DEVICE (MFR RECM PAINT
SPRAYING TYPE)
Ventilation:MFR RECM MECHANICAL
Protective Gloves:SOLV RESISTANT
Eye Protection:FACE SHIELD
Other Protective Equipment:NONE
Supplemental Safety and Health

Chemical Properties

HCC:V4
Boiling Pt:B.P. Text:105F APPROX
Spec Gravity:1.066
Evaporation Rate & Reference:10 (N-BUAC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE WHITE SLIGHTLY VISCOUS LIQ; ODOR SOLVENT
Percent Volatiles by Volume:70

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:HCL & PHOSGENE W/INCOMPLETE COMBUSTION

Disposal

Waste Disposal Methods:DISPOSE IAW FED., STATE & LOCAL CODES. MFR RECM
DISPOSE DRIED FILMS TO SOLID WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.